Pitt Boss Pro Seies 1100 upgrade

[BCsaw]

A gasket the under the door has been installed.

The pellet hopper guard has been secured by two bolts allowing pivoting access to the pellets below. Some nuts are needed to close the existing hopper bolt holes.

Storage for the probes has been established in the hopper.

The sear plate control handle was relocated to the left side.

The left side probe access hole is blocked by a magnet.

The right hand sear plate access hole is blocked by a magnet.

Heat probes are now installed in the front under the door.

* No smoke was witnessed escaping from the door and or other likely areas.

Fireblack[emoji2400] Hi Temp BBQ smoker Gasket Self Stick 15 ft High Heat 1/2 x 1/8 Black

Tools required:

 

Drill

Various drills

angle grinder with a cut off wheel

Pencil

Tape measure

 

 

Sent from my SM-N975U using Tapatalk

 

 

[BHC]

your model is different then mine....seems what you did, mine has from the factory