Jump to content

Recommended Posts

Posted

The standard RH 5 arrow came today. It had to be reconfigured to the LH side. So, I got to work and saved a bunch!

* If the Tite Spot came full length with a glue pack, you could customize it to your liking and configure it left or right hand.

To make my RH quiver LH, it must be modified to remove the mounting bracket to flip sides.

The gripper carbon rod attachment is the only hand specific part on the Rise.

Your fifth arrow on the end can be accessed by removing the qd lever bolt 5/64 set screw.

The image below shows set screw location on rear of the quiver mount. Mount shown is in the correct downward orientation allowing full access to 5 arrows.

Reversing the QD latch would make the 5th arrow on the end accessable. So facing down it is!

Cut 3 1/2" off from the gripper so you have 1/2" to reinsert into the gripper to make it 4" shorter. A propane torch melts the glue for carbon rod removal. Configure and reassemble.

The additional gripper is available at Go Hunt.com for about $25.

Now, the original can become the Rise!

The Rise gives total clearance for a cable guard roller and a Hamskea Trinity Hunter Pro Micro.

 

https://r.tapatalk.com/shareLink/topic?url=https://www.archerytalk.com/threads/tightspot-rise-vs-tightspot-standard-quiver.5695453/&share_tid=5695453&share_fid=16462&share_type=t&link_source=app

 

Sent from my SM-N975U using Tapatalk

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...