Some help from the traditional guys

[vdep217]

So yesterday I came across a lot of items at a yard sale. The compound I put up for donation here. But i also got a Browning monad stalker. Its 45lbs at 28 my question is that it has a primitive sight on it with small to lager circles that's glued on. Is any one familiar with these. Is three a way to take the hold thing off with out damaging finish. I will post pics when i get home if needed

Edited August 29, 2017 by vdep217

[Kilbo]

Pics will help but it really depends on what they used to glue it on to the bow. My guess would be even if you got it removed that you'd still see a mark on the bow. Good luck with it. Hopefully it comes off without any damage.

[vdep217]

If I leave the mounting bracket and take sight bracket off would performance be affected or noticeable

[Bill from NJ]

Clear pix of the problem would help a lot.

[Sotaroas]

Try a hair dryer becareful not to expose the riser to to much heat ! Acetone will remove adhesives and glues but un fortunately also the finish !

[MGHunter66]

So yesterday I came across a lot of items at a yard sale. The compound I put up for donation here. But i also got a Browning monad stalker. Its 45lbs at 28 my question is that it has a primitive sight on it with small to lager circles that's glued on. Is any one familiar with these. Is three a way to take the hold thing off with out damaging finish. I will post pics when i get home if needed

Interesting, most of the nomads had a sight attached to the back of the riser that the pins slid up and down on. Try applying "goof off" to the sight and let it sit for a day or two

[Rusty]

You know it's coming.  

[Rusty]

[Lunatic]

Interesting, most of the nomads had a sight attached to the back of the riser that the pins slid up and down on. Try applying "goof off" to the sight and let it sit for a day or two

 

 

Goofing off always worked for me

[Nomad]

If I leave the mounting bracket and take sight bracket off would performance be affected or noticeable

Won't hurt the performance.

[vdep217]

Here are pics

[Shootemandmountem]

Just gonna throw this out...like we did on the harleys stock reflectors stuck on the forks and back seat brackets ....leave sit in the sun on a hot day and use fishing line back and forth gently